Transparent LED Film can be directly applied to glass, depending on the product type and installation method. Suitable film-type Transparent LED Film enable installation without demolition or modification, balancing display performance and glass protection, and are adaptable for various scenarios such as shop windows and exhibition halls.
Film-type Transparent LED Film are the primary category that can be directly applied to glass. These products are only 2.5mm thick and weigh 1.3kg, making them thinner and lighter than traditional LED glass screens, and they do not require custom glass or bracket installation. Their adhesive backing uses a low-residue pressure-sensitive design, allowing direct application to substrates like tempered glass or ordinary float glass. Once applied, the screen is nearly flush from the outside, preserving the glass's original transparency. It is important to distinguish between product types: traditional laminated LED glass screens require custom integration with the glass and cannot be directly applied to existing glass, whereas film-type Transparent LED Film are specifically designed for compatibility with existing glass.
The installation outcome is influenced by the condition of the glass and the workmanship. The glass surface must be flat and free of cracks, as depressions deeper than 0.5mm can cause poor adhesion and display faults. Before installation, the glass must be thoroughly cleaned with alcohol cotton to remove dust and oil stains, otherwise, bubbles may form, affecting both transparency and display quality. The correct procedure involves step-by-step operation: peel off one-quarter of the adhesive backing to fix the top, then use a silicone squeegee to press downward evenly while peeling off the remaining backing, ensuring complete air expulsion. For curved glass, a 30°C heat gun can be used to enhance the flexibility of the LED transparent glass screen for better conformity.
Product selection determines suitability for the application. For shop window scenarios,Transparent LED Film with a light transmittance of over 80% should be chosen, allowing clear visibility of displayed items inside and avoiding obstruction of light that could impact presentation. Outdoor or south-facing windows require models with an additional anti-glare coating to reduce reflection-induced image blur. Products with a surface 3H anti-scratch coating are more durable, resistant to daily impacts from keys, shopping carts, etc., and extend service life.
Maintenance and removal after installation are straightforward. For daily cleaning, use a soft cloth dampened with water and avoid scratching the screen with hard objects. When the rental period ends or relocation is needed, the LED transparent glass screen can be peeled off directly, and any residual adhesive can be wiped away with alcohol, preventing damage to the glass surface and addressing the issue of marks left by traditional screen removal. Choosing the right product and method allows Transparent LED Film to be directly applied to glass, reducing installation costs while flexibly enhancing the display value of glass spaces.